AUO G150XTN03 key specifications
| Brand | AUO |
|---|---|
| Model | G150XTN03 |
| Size | 15″ |
| Resolution | 1024×768 |
| Interface | LVDS |
| Connector | 20-pin single-channel LVDS (most versions) |
| Panel type | TN |
| Active area (mm) | 304.128 × 228.096 |
| Brightness | See datasheet |
Specifications from slw-ele.com. Confirm values against the AUO datasheet revision you are designing to.
Supply options for the AUO G150XTN03
- Original AUO part: sourced on request. Availability, date code and lead time are confirmed per order; we do not hold stock of third-party panels.
- Alternative from our direct factories: a standard or customized module with the same size and resolution, with the mechanical and electrical differences documented before you order samples.
Standard models with the same resolution
From our direct factories’ catalog. Pinout and outline differ from the G150XTN03; we confirm fit before sampling.
| Model | Size | Resolution | Interface | Brightness (cd/m²) | FPC pins | Viewing | Touch | Outline (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| PJTM150TDS50 PengJi | 15″ | 1024×768 | LVDS | 400 | 20 | 6 o'clock | Optional | 326.5 × 253.5 × 11.8 | Request datasheet |
| PJM121GNX2R1 PengJi | 12.1″ | 1024×768 | LVDS | 400 | 20 | 6 o'clock | Optional | 279.0 × 209.0 × 900 | Request datasheet |
| PJT104H01-500P60N PengJi | 10.4″ | 1024×768 | LVDS | 200-800 | 60 | 6 o'clock | Optional | 236 × 174.3 × 7.4 | Request datasheet |
| B1097XN01/B1097XN02 PengJi | 9.7″ | 1024×768 | LVDS | 200 | 30 | All (IPS-type) | Optional | 205.808 × 58.06 | Request datasheet |
| PJT800P01H26-250P40N PengJi | 8″ | 1024×768 | LVDS | 200-600 | 40 | 6 o'clock | Optional | 174 × 136 × 2.45 | Request datasheet |
Replacing an LVDS panel
The G150XTN03 takes 20-pin single-channel LVDS (most versions). At 1024×768 and 60 Hz the pixel clock is about 57 MHz, which is within a single LVDS channel. When you move to an alternative, check:
- LVDS mapping: VESA or JEIDA bit order, and 6-bit or 8-bit colour, must match your host's output setting.
- Connector and pinout: same pin count does not mean the same pin map; an adapter FPC or cable is often enough.
- Backlight: LED driver voltage and dimming (PWM or analog) can differ from the original.
- Mechanics: outline, active-area position and mounting holes against your bezel.
What to send us
The original part number with suffix, a photo of the label and connector, your host processor and the annual quantity. We reply with the original-part availability and one or two alternatives, with the differences listed.
Note: Brightness depends on the suffix: .1 and .6 are listed at 250 cd/m², .2 and .5 at 350 cd/m². Some later suffixes (.4, .7) are listed with an eDP interface instead of LVDS.
Frequently asked questions
Can you supply the original AUO G150XTN03?
Yes, on request. We confirm availability, date code and lead time per order. We do not hold stock of third-party panels.
What can replace the G150XTN03?
A module with the same size and resolution from our direct factories, adapted where needed (FPC, backlight, outline). Send the original datasheet and we propose options with the differences listed.
Where do these G150XTN03 specifications come from?
From the source linked on this page. Brightness depends on the suffix: .1 and .6 are listed at 250 cd/m², .2 and .5 at 350 cd/m². Some later suffixes (.4, .7) are listed with an eDP interface instead of LVDS. Always design against the AUO datasheet revision for your exact part.