Innolux AT102TN03 key specifications
| Brand | Innolux |
|---|---|
| Model | AT102TN03 |
| Size | 10.2″ |
| Resolution | 800×480 |
| Interface | RGB (parallel) |
| Connector | 60-pin FPC, digital TTL (6-bit) |
| Brightness | See datasheet |
Specifications from e2echina.ti.com. Confirm values against the Innolux datasheet revision you are designing to.
Supply options for the Innolux AT102TN03
- Original Innolux part: sourced on request. Availability, date code and lead time are confirmed per order; we do not hold stock of third-party panels.
- Alternative from our direct factories: a standard or customized module with the same size and resolution, with the mechanical and electrical differences documented before you order samples.
Standard models with the same resolution
From our direct factories’ catalog. Pinout and outline differ from the AT102TN03; we confirm fit before sampling.
| Model | Size | Resolution | Interface | Brightness (cd/m²) | FPC pins | Viewing | Touch | Outline (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| PJT900P01H57-400P50N PengJi | 9″ | 800×480 | RGB (parallel) | 200-800 | 50 | 6 o'clock | Optional | 210.7 × 126.4 × 5.7 | Request datasheet |
| PJT700B04H35-200P60N PengJi | 7″ | 800×480 | RGB (parallel) | 200-500 | 60 | 6 o'clock | Optional | 165.0 × 104.0 × 3.5/2.8 | Request datasheet |
| PJT650P01H28-200P50N PengJi | 6.5″ | 800×480 | RGB (parallel) | 150-300 | 50 | 6 o'clock | Optional | 155.2 × 89.40 × 2.8 | Request datasheet |
| PJ6201H01-40H40P500 PengJi | 6.2″ | 800×480 | RGB (parallel) | 300-800 | 40 | 6 o'clock | Optional | 155.22 × 88.22 × 5.0 | Request datasheet |
| PJT500C01H29-200P40N PengJi | 5″ | 800×480 | RGB (parallel) | 200-1200 | 40 | 6 o'clock | Optional | 120.90 × 75.95 × 2.90 | Request datasheet |
| PJ5001H15-31H40P300 PengJi | 5″ | 800×480 | RGB (parallel) | 200-1200 | 40 | All (IPS-type) | Optional | 120.90 × 75.95 × 2.90 | Request datasheet |
| PJ4303H04-29H40P500 PengJi | 4.3″ | 800×480 | RGB (parallel) | 200-600 | 45 | All (IPS-type) | Optional | 105.42 × 67.07 × 2.9 | Full specs → |
| PJ4302B03-36H45P300R PengJi | 4.3″ | 480×800 | RGB (parallel) | 200-600 | 45 | 6 o'clock | Optional | 60.66 × 104.25 × 2.05 | Request datasheet |
Replacing a parallel RGB panel
The AT102TN03 uses 60-pin FPC, digital TTL (6-bit). At 800×480 and 60 Hz the pixel clock is about 27.6 MHz. When you move to an alternative, check:
- Timing: horizontal/vertical blanking and DE or SYNC mode must match what your controller generates.
- Colour depth: a 6-bit (18-bit bus) host can drive an 8-bit panel with the low bits tied, and vice versa with dithering.
- Connector and pinout: same pin count does not mean the same pin map; an adapter FPC is often enough.
- Backlight and touch: LED driver, brightness and whether the original had a resistive or capacitive touch layer.
What to send us
The original part number with suffix, a photo of the label and connector, your host processor and the annual quantity. We reply with the original-part availability and one or two alternatives, with the differences listed.
Note: Sold as V.8 and V.9; listings give different operating temperatures for the two, so confirm the version.
Frequently asked questions
Can you supply the original Innolux AT102TN03?
Yes, on request. We confirm availability, date code and lead time per order. We do not hold stock of third-party panels.
What can replace the AT102TN03?
A module with the same size and resolution from our direct factories, adapted where needed (FPC, backlight, outline). Send the original datasheet and we propose options with the differences listed.
Where do these AT102TN03 specifications come from?
From the source linked on this page. Sold as V.8 and V.9; listings give different operating temperatures for the two, so confirm the version. Always design against the Innolux datasheet revision for your exact part.