Innolux G070Y2-L01 key specifications
| Brand | Innolux |
|---|---|
| Model | G070Y2-L01 |
| Size | 7″ |
| Resolution | 800×480 |
| Interface | LVDS |
| Connector | 20-pin LVDS (1 ch, 6/8-bit) |
| Outline (mm) | 165 × 104 |
| Brightness | 500 cd/m² (typ.) |
| Operating temp. | -30 to 85 °C |
Specifications from slw-ele.com. Confirm values against the Innolux datasheet revision you are designing to.
Supply options for the Innolux G070Y2-L01
- Original Innolux part: sourced on request. Availability, date code and lead time are confirmed per order; we do not hold stock of third-party panels.
- Alternative from our direct factories: a standard or customized module with the same size and resolution, with the mechanical and electrical differences documented before you order samples.
Standard models with the same resolution
From our direct factories’ catalog. Pinout and outline differ from the G070Y2-L01; we confirm fit before sampling.
| Model | Size | Resolution | Interface | Brightness (cd/m²) | FPC pins | Viewing | Touch | Outline (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| PJT700B04H35-200P60N PengJi | 7″ | 800×480 | RGB (parallel) | 200-500 | 60 | 6 o'clock | Optional | 165.0 × 104.0 × 3.5/2.8 | Request datasheet |
| PJT650P01H28-200P50N PengJi | 6.5″ | 800×480 | RGB (parallel) | 150-300 | 50 | 6 o'clock | Optional | 155.2 × 89.40 × 2.8 | Request datasheet |
| PJ6201H01-40H40P500 PengJi | 6.2″ | 800×480 | RGB (parallel) | 300-800 | 40 | 6 o'clock | Optional | 155.22 × 88.22 × 5.0 | Request datasheet |
| PJT500C01H29-200P40N PengJi | 5″ | 800×480 | RGB (parallel) | 200-1200 | 40 | 6 o'clock | Optional | 120.90 × 75.95 × 2.90 | Request datasheet |
| PJ5001H15-31H40P300 PengJi | 5″ | 800×480 | RGB (parallel) | 200-1200 | 40 | All (IPS-type) | Optional | 120.90 × 75.95 × 2.90 | Request datasheet |
| PJT900P01H57-400P50N PengJi | 9″ | 800×480 | RGB (parallel) | 200-800 | 50 | 6 o'clock | Optional | 210.7 × 126.4 × 5.7 | Request datasheet |
| PJ4303H04-29H40P500 PengJi | 4.3″ | 800×480 | RGB (parallel) | 200-600 | 45 | All (IPS-type) | Optional | 105.42 × 67.07 × 2.9 | Full specs → |
| PJ4302B03-36H45P300R PengJi | 4.3″ | 480×800 | RGB (parallel) | 200-600 | 45 | 6 o'clock | Optional | 60.66 × 104.25 × 2.05 | Request datasheet |
Replacing an LVDS panel
The G070Y2-L01 takes 20-pin LVDS (1 ch, 6/8-bit). At 800×480 and 60 Hz the pixel clock is about 28 MHz, which is within a single LVDS channel. When you move to an alternative, check:
- LVDS mapping: VESA or JEIDA bit order, and 6-bit or 8-bit colour, must match your host's output setting.
- Connector and pinout: same pin count does not mean the same pin map; an adapter FPC or cable is often enough.
- Backlight: LED driver voltage and dimming (PWM or analog) can differ from the original.
- Mechanics: outline, active-area position and mounting holes against your bezel.
What to send us
The original part number with suffix, a photo of the label and connector, your host processor and the annual quantity. We reply with the original-part availability and one or two alternatives, with the differences listed.
Frequently asked questions
Can you supply the original Innolux G070Y2-L01?
Yes, on request. We confirm availability, date code and lead time per order. We do not hold stock of third-party panels.
What can replace the G070Y2-L01?
A module with the same size and resolution from our direct factories, adapted where needed (FPC, backlight, outline). Send the original datasheet and we propose options with the differences listed.
Where do these G070Y2-L01 specifications come from?
From the source linked on this page. Always design against the Innolux datasheet revision for your exact part.