Innolux G121X1-L03 key specifications
| Brand | Innolux |
|---|---|
| Model | G121X1-L03 |
| Size | 12.1″ |
| Resolution | 1024×768 |
| Interface | LVDS |
| Connector | LVDS (6-bit) |
| Brightness | See datasheet |
Specifications from android-kvm.googlesource.com. Confirm values against the Innolux datasheet revision you are designing to.
Supply options for the Innolux G121X1-L03
- Original Innolux part: sourced on request. Availability, date code and lead time are confirmed per order; we do not hold stock of third-party panels.
- Alternative from our direct factories: a standard or customized module with the same size and resolution, with the mechanical and electrical differences documented before you order samples.
Standard models with the same resolution
From our direct factories’ catalog. Pinout and outline differ from the G121X1-L03; we confirm fit before sampling.
| Model | Size | Resolution | Interface | Brightness (cd/m²) | FPC pins | Viewing | Touch | Outline (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| PJM121GNX2R1 PengJi | 12.1″ | 1024×768 | LVDS | 400 | 20 | 6 o'clock | Optional | 279.0 × 209.0 × 900 | Request datasheet |
| PJT104H01-500P60N PengJi | 10.4″ | 1024×768 | LVDS | 200-800 | 60 | 6 o'clock | Optional | 236 × 174.3 × 7.4 | Request datasheet |
| B1097XN01/B1097XN02 PengJi | 9.7″ | 1024×768 | LVDS | 200 | 30 | All (IPS-type) | Optional | 205.808 × 58.06 | Request datasheet |
| PJTM150TDS50 PengJi | 15″ | 1024×768 | LVDS | 400 | 20 | 6 o'clock | Optional | 326.5 × 253.5 × 11.8 | Request datasheet |
| PJT800P01H26-250P40N PengJi | 8″ | 1024×768 | LVDS | 200-600 | 40 | 6 o'clock | Optional | 174 × 136 × 2.45 | Request datasheet |
Replacing an LVDS panel
The G121X1-L03 takes LVDS (6-bit). At 1024×768 and 60 Hz the pixel clock is about 57 MHz, which is within a single LVDS channel. When you move to an alternative, check:
- LVDS mapping: VESA or JEIDA bit order, and 6-bit or 8-bit colour, must match your host's output setting.
- Connector and pinout: same pin count does not mean the same pin map; an adapter FPC or cable is often enough.
- Backlight: LED driver voltage and dimming (PWM or analog) can differ from the original.
- Mechanics: outline, active-area position and mounting holes against your bezel.
What to send us
The original part number with suffix, a photo of the label and connector, your host processor and the annual quantity. We reply with the original-part availability and one or two alternatives, with the differences listed.
Note: Linux treats G121X1-L03 (6-bit) and G121XCE-L01 (8-bit) as equivalent panels; distributors list 450 or 600 cd/m².
Frequently asked questions
Can you supply the original Innolux G121X1-L03?
Yes, on request. We confirm availability, date code and lead time per order. We do not hold stock of third-party panels.
What can replace the G121X1-L03?
A module with the same size and resolution from our direct factories, adapted where needed (FPC, backlight, outline). Send the original datasheet and we propose options with the differences listed.
Where do these G121X1-L03 specifications come from?
From the source linked on this page. Linux treats G121X1-L03 (6-bit) and G121XCE-L01 (8-bit) as equivalent panels; distributors list 450 or 600 cd/m². Always design against the Innolux datasheet revision for your exact part.