Innolux G121I1-L01 key specifications
| Brand | Innolux |
|---|---|
| Model | G121I1-L01 |
| Size | 12.1″ |
| Resolution | 1280×800 |
| Interface | LVDS |
| Connector | 30-pin LVDS |
| Panel type | MVA |
| Brightness | 400 cd/m² (typ.) |
| Operating temp. | -10 to 70 °C |
Specifications from embedded.avnet.com. Confirm values against the Innolux datasheet revision you are designing to.
Supply options for the Innolux G121I1-L01
- Original Innolux part: sourced on request. Availability, date code and lead time are confirmed per order; we do not hold stock of third-party panels.
- Alternative from our direct factories: a standard or customized module with the same size and resolution, with the mechanical and electrical differences documented before you order samples.
Standard models with the same resolution
From our direct factories’ catalog. Pinout and outline differ from the G121I1-L01; we confirm fit before sampling.
| Model | Size | Resolution | Interface | Brightness (cd/m²) | FPC pins | Viewing | Touch | Outline (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| PJT101P02H28-600P40N PengJi | 10.1″ | 1280×800 | LVDS | 200-800 | 50 | All (IPS-type) | Optional | 227.56 × 148.2 × 2.5 | Request datasheet |
| PJ10109I02-25H40P200 PengJi | 10.1″ | 800×1280 | MIPI DSI | 200 | 40 | All (IPS-type) | — | 143 × 228.6 × 2.5 | Request datasheet |
| PJ8002I01-26H31P200 PengJi | 8″ | 800×1280 | MIPI DSI | 200 | 31 | All (IPS-type) | — | 114.6 × 183.75 × 2.6 | Full specs → |
| PJT700C19H23-200P40N PengJi | 7″ | 800×1280 | LVDS | 200-600 | 40 | All (IPS-type) | Optional | 99.9 × 155.42 | Request datasheet |
| PJ7014H01-24H30P400 PengJi | 7″ | 1280×800 | MIPI DSI | 200-600 | 30 | All (IPS-type) | Optional | 161.2 × 105.5 × 2.4 | Request datasheet |
Replacing an LVDS panel
The G121I1-L01 takes 30-pin LVDS. At 1280×800 and 60 Hz the pixel clock is about 74 MHz, which is within a single LVDS channel. When you move to an alternative, check:
- LVDS mapping: VESA or JEIDA bit order, and 6-bit or 8-bit colour, must match your host's output setting.
- Connector and pinout: same pin count does not mean the same pin map; an adapter FPC or cable is often enough.
- Backlight: LED driver voltage and dimming (PWM or analog) can differ from the original.
- Mechanics: outline, active-area position and mounting holes against your bezel.
What to send us
The original part number with suffix, a photo of the label and connector, your host processor and the annual quantity. We reply with the original-part availability and one or two alternatives, with the differences listed.
Frequently asked questions
Can you supply the original Innolux G121I1-L01?
Yes, on request. We confirm availability, date code and lead time per order. We do not hold stock of third-party panels.
What can replace the G121I1-L01?
A module with the same size and resolution from our direct factories, adapted where needed (FPC, backlight, outline). Send the original datasheet and we propose options with the differences listed.
Where do these G121I1-L01 specifications come from?
From the source linked on this page. Always design against the Innolux datasheet revision for your exact part.