Specifications
| Diagonal size | 8" |
|---|---|
| Manufactured by | Shenzhen PengJi Photoelectricity Co., Ltd. (direct factory) |
| Resolution | 800×1280 |
| Panel type | IPS |
| Interface | MIPI DSI |
| Pixel pitch (mm) | 0.192(H) × 0.1805(V) mm |
| Touch | None |
| Brightness | 200 cd/m² (nits) |
| Viewing angle | Full viewing angle (all directions) |
| Outline (mm) | 114.6(H) ×184.104(V) × 2.6(T) mm |
| Active area (mm) | 107.64 (H) *172.224(V) mm |
| FPC / connector | 31-pin |
Data sources
- Specifications from the product page of the factory that builds the PJ8002I01-26H31P200 (Shenzhen PengJi Photoelectricity Co., Ltd.).
- Brightness is the standard-backlight typical value encoded in the PengJi part number (e.g. …P400 = 400 cd/m²), cross-checked against PengJi's product table and datasheets; other backlight levels can be built.
- Confirm final values against the datasheet supplied with samples.
Integration calculations
Figures below are calculated from the PJ8002I01-26H31P200’s 800×1280 resolution and MIPI DSI, so you can size the host before requesting samples. Refresh rates are theoretical bus limits; real throughput is lower once command overhead and rendering time are included.
| Pixel density | 189 PPI |
|---|---|
| Native orientation | Portrait (800×1280); rotate in the driver for landscape UIs |
| Full frame buffer | 1.95 MB at RGB565 · 2.93 MB at RGB888 |
| MIPI DSI bandwidth for 60 Hz (RGB888) | ≈ 1.77 Gbit/s → 0.88 Gbit/s per lane on 2 lanes, 0.44 on 4 lanes |
At 200 cd/m² it is sized for indoor use; the backlight can be upgraded for brighter environments.
Hosts with a native MIPI DSI peripheral
Two 4-lane MIPI connectors usable for DSI.
Native MIPI DSI output.
- ESP32-P4
2-lane MIPI DSI controller.
Interface support is based on each processor’s published display peripherals, not a bench test of this module. Ask us for tested init code.
Frequently asked questions
What is the brightness of the PJ8002I01-26H31P200?
200 cd/m² typical with the standard backlight. At 200 cd/m² it is sized for indoor use; the backlight can be upgraded for brighter environments.
What interface does the PJ8002I01-26H31P200 use?
MIPI DSI through a 31-pin FPC. Pin definition and timing are in the datasheet, which you can request on this page.
Which processors can drive the PJ8002I01-26H31P200?
Raspberry Pi 5: Two 4-lane MIPI connectors usable for DSI. Rockchip RK3568: Native MIPI DSI output. ESP32-P4: 2-lane MIPI DSI controller.
What is the MOQ and lead time for the PJ8002I01-26H31P200?
Samples start from 1 pc. Production MOQ and lead time depend on quantity and any customization (FPC length, backlight, touch), and are agreed per project with our sales team. Send your annual volume and target date for a quote.
